***  SETUP LOGFILE ***

Filename:        ALM_LOG.TXT
Setup Source Version:   K03.01.00.15_11.01.00.02
SetupMasterFrame Name:   Product_Masterframe
Install Start:   1-3-2007, 14:44:29

    ProductName: 'Siemens Automation License Manager'
    Release: 'V04.00.00.00_01.30.00.01'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2226'
    Property 'Installed'; ''
    Property 'REINSTALLMODE'; ''
    SharedPath: 'C:\Siemens\Common\'
    Property 'DATABASE'; 'C:\DOCUME~1\ww\CONFIG~1\Temp\88d16.msi'
    Property 'OriginalDatabase'; 'F:\sw\alm\DISK1\Setup.msi'
    REBOOTFILE= 
    COMMANDLINE= -OF:C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
       Setup startet with parameterfile (OF-file).
         (PR)<= SetupMode = BATCH
         (PR)<= InstType = SIMATIC_NET
         (PR)<= JumpOverParam = 0
         (OF)<= SetupSucceeded = 0
         (OF)<= AuthorizationDone = 1
         (OF)<= RebootRequested = 0
    
       read Properties from (OF-file): C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
         (PR)<= SetupLanguage = B
         (PR)<= LanguagesToInstall = ABCDE
         (PR)<= StartLanguage = B
         (PR)<= NameOfUser = VIOLET
         (PR)<= NameOfCompany = VIOLET REINFORCEMENT S. de R.L
         (PR)<= ID empty
         (PR)<= DestinationDrive = C
         (PR)<= DestinationPath = \Archivos de programa\SIEMENS\Automation License Manager
         (PR)<= CommonDrive = C
         (PR)<= LicenseSource = A
         (PR)<= LicenseDestination = C
         (PR)<= LicenseRequested = 1
         (PR)<= LicenseManagerHandling = 0
         (PR)<= NoOScheck = 0
         (PR)<= RSInstallVersion empty
    


Init global functions
Ini File not found, extract
Windows Suite: Embedded
Windows Suite: not Embedded
SetMSISource: Property Installed is empty, New install
Stream out ini file

    In Path_SetInstallDir_from_OPFile
    Destination Path Read from OPFile \Archivos de programa\SIEMENS\Automation License Manager does not exist
    DestinationDrive read from OPFIle C is writeable. Dialog SetupType will not be displayed
    DestinationDrive from OPFile \Archivos de programa\SIEMENS\Automation License Manager Path set as INSTALLDIR


 ReadInstalledVersionSettings
AUTSW Key: SOFTWARE\Siemens\AUTSW\LicenseManager
Open AUTSW Key failed, Product not installed

Set Directories
ADSStrings.ini path: C:\DOCUME~1\ww\CONFIG~1\Temp\{8709DD83-A73F-46F8-BCA1-234A7E04D82C}\ADSStrings.ini

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set Property for STARTMENU_PLACE
Set Property for STARTMENU_PLACE = AUTO
MANUALCONNDIR = C:\Siemens\Documentacin\
MANUALSTARTENTRY = Documentacin
MANUALSTARTDIR = C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set Property for STARTMENU_PLACE
Set Property for STARTMENU_PLACE = AUTO
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End

    
    Installation Mode
    Table ADSDialogs created
    InstallationMode: Installation, Dialog InstallWelcome added to ADSDialogs table
    InstallationMode: Installation, Dialog ShowReadme added to ADSDialogs table
    InstallationMode: Installation, Dialog DLG_InstallationRequirements added to ADSDialogs table
    InstallationMode: Installation, Dialog LicenseAgreement added to ADSDialogs table
    InstallationMode: Installation, Dialog SetupType added to ADSDialogs table
    InstallationMode: Installation, Dialog DLG_ProductLanguage added to ADSDialogs table
    InstallationMode: Installation, Dialog CustomSetup added to ADSDialogs table
    InstallationMode: Installation, Dialog ReadyToInstall added to ADSDialogs table
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: InstallWelcome. Next selected
    DialogIndex of next dialog: 1
    Dialog InstallWelcome will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: ShowReadme. Next selected
    DialogIndex of next dialog: 2
    Dialog ShowReadme will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: DLG_InstallationRequirements. Next selected
    DialogIndex of next dialog: 3
    start function Dlg_PrepareInstallationRequirementsDlg

    Test suppositions
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    OperatingSystem condition string to check: ( (VersionNT=500)AND (ServicePackLevel>=4 ) ) OR (( (VersionNT=501) AND (ServicePackLevel>=1 ) )) OR ((VersionNT>501)) OR ((VersionNT>=600))
    Operating System OK
    Internet Explorer OK
    product is not installed
    Overinstallation OK
    Installed type OK

Check existing rename.
test for running applications:
    ApllicationNames: [INSTALLDIR]ALMAPP\ALMAPPX.EXE
    CheckForRunningTasks [INSTALLDIR]ALMAPP\ALMAPPX.EXE
    CheckForRunningTasks: WNT
     Test running Apllication : C:\Archivos de programa\SIEMENS\Automation License Manager\ALMAPP\ALMAPPX.EXE
    Supposition: check Conditions
    Dialog DLG_InstallationRequirements will not be displayed, reason: Batch ModeNo errors or warnings found
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: LicenseAgreement. Next selected
    DialogIndex of next dialog: 4
    Dialog LicenseAgreement will not be displayed, reason: Batch Mode
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: SetupType. Next selected
    DialogIndex of next dialog: 5
    Dialog SetupType will not be displayed, reason: Batch Mode
    User choose Setupmode Normal
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: DLG_ProductLanguage. Next selected
    DialogIndex of next dialog: 6
    Setup started in Batch mode, or after a Reboot, read languages from input file
    Dialog DLG_ProductLanguage will not be displayed, reason: Batch ModeSetupMode = BATCH or Reboot. At least one language selected.
    Selected Startlanguage: ENGLISH
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: CustomSetup. Next selected
    DialogIndex of next dialog: 7
    Dialog CustomSetup will not be displayed, reason: Batch ModeBatch ModeSetupMode = BATCH  and Update Mode =   and MaintenanceMode = 
    --------------------------------------------------------------------------------------------
    DialogTitle of next dialog: ReadyToInstall. Next selected
    DialogIndex of next dialog: 8
    Dialog ReadyToInstall will not be displayed, reason: Batch Mode

Free Space on local drives:
	Total Size on "C:\": 40007729152 bytes (38154 MB)	Free space: 3274792960  bytes (3123 MB)
	Total Size on "D:\": 40007729152 bytes (38154 MB)	Free space: 33258254336  bytes (31717 MB)

Used folders:
	"INSTALLDIR": C:\Archivos de programa\SIEMENS\Automation License Manager\
	"COMMONDIR": C:\Siemens\Common\
	"WindowsFolder": C:\WINDOWS\
	"TempFolder": C:\DOCUME~1\ww\CONFIG~1\Temp\
	"ProgramFilesFolder": C:\Archivos de programa\


SetMSISource: Property Installed is empty, New install
_ADS_initSuite Start
Ini File not found, extract
Windows Suite: Embedded
Windows Suite: not Embedded
_ADS_initSuite End
    
    ************
    
    ProductName: 'Siemens Automation License Manager'
    Release: 'V04.00.00.00_01.30.00.01'
    Physical memory [MB]: '2046'
    Free virtual memory [MB]: '2213'
    Property 'Installed'; ''
    Property 'REINSTALLMODE'; ''
    SharedPath: 'C:\Siemens\Common\'
    Default Destination: 'C:\Archivos de programa\SIEMENS\Automation License Manager\'
    Property 'DATABASE'; 'C:\WINDOWS\Installer\7bf8e.msi'
    Property 'OriginalDatabase'; 'F:\sw\alm\DISK1\Setup.msi'
    REBOOTFILE= 
    COMMANDLINE= -OF:C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
       Setup startet with parameterfile (OF-file).
         (PR)<= JumpOverParam = 0
         (OF)<= SetupSucceeded = 0
         (OF)<= AuthorizationDone = 1
         (OF)<= RebootRequested = 0
    
       read Properties from (OF-file): C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
         (PR)<= ID empty
         (PR)<= LicenseManagerHandling = 0
         (PR)<= NoOScheck = 0
         (PR)<= RSInstallVersion empty
    
Stream out ini file

    Function DetermineShortCutValues
    Language ID: 1034

Set Directories
ADSStrings.ini path: C:\DOCUME~1\ww\CONFIG~1\Temp\{8709DD83-A73F-46F8-BCA1-234A7E04D82C}\ADSStrings.ini

Get COMMONDIR from INSTALLDIR
CommonDir found in Registry
Set COMMONDIR to C:\Siemens\Common\
Actual ConnPath: C:\Siemens\Documentacin\
Actual StartEntry: Documentacin
Set Property for STARTMENU_PLACE
Set Property for STARTMENU_PLACE = AUTO
MANUALCONNDIR = C:\Siemens\Documentacin\
MANUALSTARTENTRY = Documentacin
MANUALSTARTDIR = C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Set MANUALCONNDIR to C:\Siemens\Documentacin\
Set MANUALSTARTENTRY to Documentacin
Set MANUALSTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
Actual ConnPath: C:\Siemens\Indicaciones relativas al producto\
Actual StartEntry: Indicaciones relativas al producto
Set Property for STARTMENU_PLACE
Set Property for STARTMENU_PLACE = AUTO
Set READMECONNDIR to C:\Siemens\Indicaciones relativas al producto\
Set READMESTARTENTRY to Indicaciones relativas al producto
Set READMESTARTDIR to C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
Set SIEMENSMENUFOLDER to: C:\Documents and Settings\All Users\Men Inicio\
Set Directories End

 Start _Create_wosDirProperties
    Set Properties for Directories whithout slash is in IS-Script deactivated
    Function DeleteShortCutsLangUnused
    Language ID: 1034
    
    Start TestSuppositionsExecute

    Test suppositions
    Found Operating System: 
       VersionNT = 501
       ServicePackLevel = 3
       NTProductType = 1
    OperatingSystem condition string to check: ( (VersionNT=500)AND (ServicePackLevel>=4 ) ) OR (( (VersionNT=501) AND (ServicePackLevel>=1 ) )) OR ((VersionNT>501)) OR ((VersionNT>=600))
    Operating System OK
    Internet Explorer OK
    product is not installed
    Overinstallation OK
    Installed type OK

Check existing rename.
test for running applications:
    ApllicationNames: [INSTALLDIR]ALMAPP\ALMAPPX.EXE
    CheckForRunningTasks [INSTALLDIR]ALMAPP\ALMAPPX.EXE
    CheckForRunningTasks: WNT
     Test running Apllication : C:\Archivos de programa\SIEMENS\Automation License Manager\ALMAPP\ALMAPPX.EXE
    Supposition: check Conditions
    
    TestSuppositionsExecute, Errors : 0, Warnings: 0

Select language features
    Selected Startlanguage: ENGLISH
Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: 
Product Siemens Automation License Manager     Version: V4.0     Release: V04.00.00.00_01.30.00.01;    01-03-2007;14:44:34

    Run StartApplBefore

StartApplBefore
    Application to start: , StartAt = 
    Application to start 2 : C:\Siemens\Common\SWS\PlugIns\SCP\instdrv.exe, StartAt = 
    Shall start instdrv.exe in C:\Siemens\Common\SWS\PlugIns\SCP\
    ChangeDirectory to C:\Siemens\Common\SWS\PlugIns\SCP for instdrv.exe in C:\Siemens\Common\SWS\PlugIns\SCP\
  ** INFO: Could not find application instdrv.exe in C:\Siemens\Common\SWS\PlugIns\SCP\
  ** INFO: Perhaps product is not installed!
    Application to start: C:\Siemens\Common\SWS\PlugIns\SCP\instdrv.exe, StartAt = 
DeinstOldCompSetupVersion Begin


[CompSetup Pre-Deinstall]: Collect and prepare Deinstallation of component setups (for update):
Performing Scan Components...
SourceDir: F:\sw\alm\DISK1\
 ProductCode Client: {8709DD83-A73F-46F8-BCA1-234A7E04D82C}
 SetupLanguage of client: 1033
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
 
Found Component: ACC
 Now read IniFile :F:\sw\alm\DISK1\ACC\Version.ini
 Msi component detected (to install): automation access control component.msi
Found Component: LLAITF
 Now read IniFile :F:\sw\alm\DISK1\LLAITF\Version.ini
 Msi component detected (to install): license logon interface.msi
 

Performing Deinstall Components...
 Preparing Deinstall Component: LLAITF
 IsInstalled: 0, MsiCompInstalled: 0
 Component not installed. No deinstall necessary.
 Preparing Deinstall Component: autacc
 IsInstalled: 0, MsiCompInstalled: 0
 Component not installed. No deinstall necessary.
[CompSetup Pre-Deinstall]: -- End of section


DeinstOldCompSetupVersion End, return 0

Prepare UnzipFile: write informations for installation to ini-file
Prepare UnzipFiles End

Init AUTSW Structure
    PRODUCTVERSIONTYPE: FULLVERSION
    AUTSW Key Name:LicenseManager
    AUTSW Corr:V4.0.0.0
    AUTSW Release:V04.00.00.00_01.30.00.01
    AUTSW TechnVersion:V4.0.0.0
    AUTSW Version:4.0
    AUTSW VersionString:V4.0
    AUTSW ProdCopyright:2003-2008
    AUTSW MainFile:[INSTALLDIR]almapp\almappx.exe
    AUTSW Path:C:\Archivos de programa\SIEMENS\Automation License Manager\
    AUTSW ProdGroup:S7
    AUTSW ProdName:Siemens Automation License Manager
    AUTSW ProdType:NORMAL
__________________________________
Process Before DataMove
    Change Attribut

UnzipFiles, FileCount 0
UnzipFiles End

Create AUTSW Key
Save actual AUTSW-Informations for Rollback

Write AUTSW-Information to Registry
    SharedPath already exists in Registry :C:\Siemens\Common\
Change UninstallString
    Write DisplayName: Siemens Automation License Manager V4.0  
Change UninstallString for Vista not necessary, it is not Vista:501
Change UninstallString 2 for Vista not necessary, it is not Vista:501
__________________________________
Process After DataMove
    Change Attribut
    
    Zip_DeleteSamples
    Reading from section UNZIP

Create language folder for documentation shortcuts
    ReadmeConnDir: C:\Siemens\Indicaciones relativas al producto\
    ReadmeStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Indicaciones relativas al producto
    Write ReadmeConnPath to Registry
    Write ReadmeStartEntry to Registry: Indicaciones relativas al producto
    Add Shortcut to Readme Folder: Deutsch
    Add Shortcut to Readme Folder: English
    Add Shortcut to Readme Folder: Franais
    Add Shortcut to Readme Folder: Espaol
    Add Shortcut to Readme Folder: Italiano
    ManualConnDir: C:\Siemens\Documentacin\
    ManualStartDir: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\Documentacin
    Write ManualConnPath to Registry
    Write ManualStartEntry to Registry: Documentacin
    Add Shortcut to Documentation Folder: Deutsch
    Add Shortcut to Documentation Folder: English
    Add Shortcut to Documentation Folder: Franais
    Add Shortcut to Documentation Folder: Espaol
    Add Shortcut to Documentation Folder: Italiano
    Delete Shortcut to Documentation Folder: Japanese
    Delete Shortcut to Documentation Folder: Chinese
Create Users and Groups
MaxCount: 
Create Users
MaxCount: 
Create Groups
Create Users and Groups End

Attach Users to Groups
MaxCount: 
Attach Users to groups 
Attach Users to Groups End

Change Permissions
Change Permissions in registry
MaxCount: 
MaxCount: 
Change Permissions on folders
Detect file system on C:\Documents and Settings\All Users\Datos de programa\Siemens\Automation\Automation License Manager\projects
File system on C:\ (volumename ) is NTFS
Condition1=
Change Permission: "C:\Documents and Settings\All Users\Datos de programa\Siemens\Automation\Automation License Manager\projects": USERS, RWX
SecChangePermission End
Change Permissions End
Shortcut: C:\Siemens\Indicaciones relativas al producto\Chinese\Automation License Manager  -  Component selected
Language independent: create shortcut
Shortcut: C:\Siemens\Indicaciones relativas al producto\Japanese\Automation License Manager  -  [Component selected
Language independent: create shortcut
Shortcut: C:\Documents and Settings\All Users\Escritorio\Automation License Manager.lnk (Description=Automation License Manager, Target=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\almappx.exe, WorkingDir=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\, Arguments=, Icon=C:\WINDOWS\Installer\{8709DD83-A73F-46F8-BCA1-234A7E04D82C}\almappx.exe.ico, Component=ALMAPPX.EXE.D42CC398_EC22_4B6E_9C55_D4EECC47DB42, Language=2052)
Component selected
Language not selected
Shortcut: C:\Documents and Settings\All Users\Escritorio\Automation License Manager.lnk (Description=Automation License Manager, Target=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\almappx.exe, WorkingDir=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\, Arguments=, Icon=C:\WINDOWS\Installer\{8709DD83-A73F-46F8-BCA1-234A7E04D82C}\almappx.exe.ico, Component=ALMAPPX.EXE.D42CC398_EC22_4B6E_9C55_D4EECC47DB42, Language=1041)
Component selected
Language not selected
Shortcut: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\License Management\Automation License Manager.lnk (Description=Automation License Manager, Target=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\almappx.exe, WorkingDir=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\, Arguments=, Icon=C:\WINDOWS\Installer\{8709DD83-A73F-46F8-BCA1-234A7E04D82C}\almappx.exe.ico, Component=ALMAPPX.EXE.D42CC398_EC22_4B6E_9C55_D4EECC47DB42, Language=2052)
Component selected
Language not selected
Shortcut: C:\Documents and Settings\All Users\Men Inicio\SIMATIC\License Management\Automation License Manager.lnk (Description=Automation License Manager, Target=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\almappx.exe, WorkingDir=C:\Archivos de programa\SIEMENS\Automation License Manager\almapp\, Arguments=, Icon=C:\WINDOWS\Installer\{8709DD83-A73F-46F8-BCA1-234A7E04D82C}\almappx.exe.ico, Component=ALMAPPX.EXE.D42CC398_EC22_4B6E_9C55_D4EECC47DB42, Language=1041)
Component selected
Language not selected
Shortcut: C:\Siemens\Documentacin\Japanese\Automation License Manager - Component not selected (-1): delete shortcut
Shortcut: C:\Siemens\Documentacin\Chinese\Automation License Manager - Component not selected (-1): delete shortcut

WriteRegistryValues


 Custom: ProcessAfterdataMove
DisplayProductLanguage is set
write language information to registry
Inst Languages: GERMAN,ENGLISH,FRENCH,SPANISH,ITALIAN
Start Language: ENGLISH
!!! No global dll found !!!


[CompSetup Install SharedComponentsBefore]: Collect and prepare Installation of component setups (with older version):
Performing Scan Components...
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
SourceDir: F:\sw\alm\DISK1\
ProductCode of client: {8709DD83-A73F-46F8-BCA1-234A7E04D82C}
 SetupLanguage of client: 1033
Read section: SharedComponentsBefore
Clientname: LicenseManager_{8709DD83-A73F-46F8-BCA1-234A7E04D82C}
FeatureName for Component ACC is empty
Found Component ACC
 [SharedComponentsBefore]ComponentName1=ACC
 Msi component detected (to install): automation access control component.msi
FeatureName for Component LLAITF is empty
Found Component LLAITF
 [SharedComponentsBefore]ComponentName2=LLAITF
 Msi component detected (to install): license logon interface.msi

Performing Install Components...
 Install Component: Automation Access Control Component
 Component Logfile (create/append): C:\WINDOWS\ACC_LOG.TXT
 IsInstalled: 0, MsiCompInstalled: 0
Test for Reinstall: Is Msi CompSetup..
   Normal Component new-installation: ACC
 IsInstalled: 0, MsiCompInstalled: 0
 Component not (already and/or no longer) installed: Will install it...
 SetupSucceeded Value (1 or 2 would be OK): 1
 Client entry set empty - compsetup finished.
 Install Component: License Logon Interface
 Component Logfile (create/append): C:\WINDOWS\LLAITF_LOG.TXT
 IsInstalled: 0, MsiCompInstalled: 0
Test for Reinstall: Is Msi CompSetup..
   Normal Component new-installation: LLAITF
 IsInstalled: 0, MsiCompInstalled: 0
 Component not (already and/or no longer) installed: Will install it...
 SetupSucceeded Value (1 or 2 would be OK): 1
 Client entry set empty - compsetup finished.
[CompSetup Install  SharedComponentsBefore]: -- End of section



Process after first component installation
[RegisterFiles]:
Process after first component installation End

    Run StartApplAfter

StartApplAfter
!!! No global dll found !!!


[CompSetup Install SharedComponentsAfter]: Collect and prepare Installation of component setups (with older version):
Performing Scan Components...
Property REINSTALL: 
Property REINSTALLMODE: 
Property ADS_OLDDB: 
SourceDir: F:\sw\alm\DISK1\
ProductCode of client: {8709DD83-A73F-46F8-BCA1-234A7E04D82C}
 SetupLanguage of client: 1033
Read section: SharedComponentsAfter
Clientname: LicenseManager_{8709DD83-A73F-46F8-BCA1-234A7E04D82C}

Performing Install Components...
[CompSetup Install  SharedComponentsAfter]: -- End of section



Process after second component installation

DeleteFilesAtEnd
delete file failed: C:\Siemens\Common\SWS\PlugIns\SCP\scpdrv.sys, return: 2

Paraconfiguration

ParaSection: Para
 Setup key = SOFTWARE\SIEMENS\LicenseManager\\General\Setup
Condition1 is : 
Application to be started: C:\Siemens\Common\sws\almsrv\almsrvx.exe
Start Para File: (return=16777215) C:\Siemens\Common\sws\almsrv\almsrvx.exe  /movefiles
Condition2 is : 
Application to be started: C:\Siemens\Common\sws\almsrv\almsrvx.exe
Start Para File: (return=0) C:\Siemens\Common\sws\almsrv\almsrvx.exe  -start
Condition3 is : 
Application to be started: C:\Siemens\Common\SWS\PlugIns\SCP\instdrv.exe
Start Para File: (return=0) C:\Siemens\Common\SWS\PlugIns\SCP\instdrv.exe  /S /C scpdrv remove
Condition1 is : 
reboot needed from ini-file
ForceRebootCondition NULLSESSIONPIPE <> "1" is TRUE
Write Result to OPFile
Write ReplaceInUseFiles="" Reboot=
Write RebootRequested=1 to OPFile
Section [Results]: SetupSucceeded written to C:\DOCUME~1\ww\CONFIG~1\Temp\OPFILE.TXT
Write LicenseRequested="0"
Remove old Deinst_SP-Keys 
Process after second component installation End

Citamisfile: C:\WINDOWS\\citamis.str
Eintrag in Citamisfile: ----> Done Product Siemens Automation License Manager     Version: V4.0;01-03-2007;14:45:19


** Error(s): 0 Warning(s): 2
Componentsetup Errors (not succeeded): 0 (of total count:2)

End of installation. 

Logfile closed: 1-3-2007, 14:45:19
***************************
